- A Frames
- Drawbars
- Hitch Kits & Components
- Hydraulic Levelling Boxes
- Hydraulic Top Links
- Leveling Boxes & Components
- Lift Arms Rods & Shafts
- Linch Pins
- Linkage Balls & Bushes
- Linkage Pins
- Lower Link Arms & Components
- Manual Top Links
- Quick Release
- Ratchet Links & Components
- Stabilizer
- Top Link Components
- Trailer Hitches
Skip to Content
US
800 443 6472
Hoses
FILTER
-
S.64768Compressor Hose
This hose can be used with any machine with an air supply or air brakes its supplied with a screw coupler at one end and snap on connector at the other alowing you to use it with a air line gauge to fill the tires or connect an air blow gun to it to clean the radiator out etc. (Thread size for inlet fitting: 16mm)
-
-
-
-
-
S.14704
Heater Hose 1/2, 10m
High strength polyester yarn - 2 ply (Length: 10m). I/D: 13mm (1/2) -35° to +100°C -
S.14706
Heater Hose 3/4, 10m
High strength polyester yarn - 2 ply (Length: 10m). I/D: 19mm (3/4) -35° to +100°C -
S.14705
Heater Hose 5/8, 10m
High strength polyester yarn - 2 ply (Length: 10m). I/D: 16mm (5/8) -35° to +100°C -
S.19156
Smooth Fuel Hose - 4 x 9mm x 15M
TBSE hose is engineered with premium grade compounds to fuel engines while maintaing efficiency and performance. With a low permability rate, this hose is well known for its reliability and life expectation. The low permeation is a reflection of Parker's environment friendly attitude. The hose is flexible for easy routing in and around small engines and compartments and the cover is resistant to abrasion, oil, and weatheringMarkets Automotive TransportationMobileVocationalFeatures/BenefitsAntistatic cover and tube compounds to dissipate electical chargesSuitable also for B20 and E100 up to 70°C to permit the use with multiple refined fuelsDesign Factor 3:1 enhances safety for equipment and enginesAvailable in reels for display stand to facilitate operations in your workshopApplicationsOn-road and off-road vehiclesBlowers, grinders, mowersLeaded and unleaded fuels, biodiesel, ethanol and gasoline
-
S.19157
Smooth Fuel Hose - 5 x 10mm x 15M
TBSE hose is engineered with premium grade compounds to fuel engines while maintaing efficiency and performance. With a low permability rate, this hose is well known for its reliability and life expectation. The low permeation is a reflection of Parker's environment friendly attitude. The hose is flexible for easy routing in and around small engines and compartments and the cover is resistant to abrasion, oil, and weatheringMarkets Automotive TransportationMobileVocationalFeatures/BenefitsAntistatic cover and tube compounds to dissipate electical chargesSuitable also for B20 and E100 up to 70°C to permit the use with multiple refined fuelsDesign Factor 3:1 enhances safety for equipment and enginesAvailable in reels for display stand to facilitate operations in your workshopApplicationsOn-road and off-road vehiclesBlowers, grinders, mowersLeaded and unleaded fuels, biodiesel, ethanol and gasoline