Skip to Content
US
800 443 6472
Adhesives & Sealants
FILTER
-
S.24132Black Silicone RTV3 - 310ml
Flexible silicone rubber that bonds, fills and seals permanently and can be used on a wide variety of rubber, plastic and metal surfaces. Provides a seal against water & oils and can join lightweight components in many maintenance and engineering areas.
-
S.24103
BondLoc B2013 - Steel Epoxy Resin - 25ml
A steel-filled epoxy putty for general maintenance and repairs. Can be used to repair worn or fatigued metals, patch castings, making jigs and fixtures, rebuild pumps and valve bodies.Mix Ratio : 1:1Colour : GreyViscosity : 50,000 - 75,000cpsTensile Strength (Steel) : 14-18Nmm2Working Time : Less than 4 minsFixture Time : Less than7 mins -
S.24070
BondLoc B222 - Screwlock - 10ml
Bondloc B222 is a low strength threadlocker suitable for all threaded assemblies, particularly good for small fasteners and set screws.Designed for easy disassembly with hand tools, helps minimise and reduces loosening through vibrating assemblies.Ideal for low strength threadlocking on fragile alloys that could fracture during disassembly.Colour: PurpleViscosity: 900 - 1,500 cpsBreakaway Strength:Less than 6Nm (ISO 10964)Prevail Torque: 4NmCure Speed:Less than 15mins @ 20°C with activatorFull Cure Time: 12 hours @ 20°CMin Max Temp: -55°C - +150°C -
S.24075
BondLoc B243 - Nutlock - Oil Tolerant - 50ml
Bondloc B243 is a medium strength, oil tolerant threadlocker designed for direct application onto ''as received parts'' where an oily film exists or where contamination is a problem.This product works on passive substrates like plated surfaces and stainless steel as well as active metals like brass and copper.Suitable for use with Diesel and Petrol.Colour: BlueViscosity: 2,500 - 3,000cpsBreakaway Strength on Steel: Greater Than 25Nm (IOS 10964)Prevail Torque: 5NmCure speed:Less than 15 mins @ 20°CFull Cure Time: 24 hoursMin Max Temp: -55°C - +180°C -
S.24076
BondLoc B270 - Studlock - 10ml
Bondloc B270 is a high strength threadlocker which prevents loosening against vibration when sealing of bolts, nuts and studs.Colour: GreenViscosity: 400 - 600cpsBreakaway Strength on Steel: Greater Than 33Nm (ISO 10964)Prevail Torque: 39NmCure speed: 10 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +180°C -
S.24078
BondLoc B270 - Studlock - 50ml
Bondloc B270 is a high strength threadlocker which prevents loosening against vibration when sealing of bolts, nuts and studs.Colour: GreenViscosity: 400 - 600cpsBreakaway Strength on Steel: Greater Than 33Nm (ISO 10964)Prevail Torque: 39NmCure speed: 10 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +180°C -
S.24079
BondLoc B275 - Studlock - High Viscosity - 50ml
Bondloc B275 is high strength, high viscosity, thixotropic threadlocker that prevents loosening against vibration when used on various types of threads orM25.It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. Can be disassembled by heating to 300°C.Contains a fluorescing additive to allow monitoring under UV light.Colour: GreenViscosity: 7,000cpsGap Fill: 0.2mmBreakaway Strength on Steel: Greater Than25Nm (ISO 10964)Fixture Speed: Less than10 mins - 6 hours with activatorFull Cure Time: 24 hoursMin Max Temp: -55°C - +150°C -
S.24083
BondLoc B510 - Gasket Maker - 50ml
Bondloc B510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal parts.B510 has high temperature and chemical resistance and provides an instant low pressure seal.Typical applications include sealing rigid flange faces on transmissions and motor casings. Suitable for surface imperfections up to 0.25mm.Colour: PinkViscosity: 40,000 - 140,000cpsGap Fill: 0.25mmTensile Strength on Steel: Greater Than 5Nmm2 (ISO 4587)Fixture Speed: 15 mins - 2 hours with activatorFull Cure Time: 12 hoursMin Max Temp: -55°C - +230°C -
S.24085
BondLoc B515 - Flexible Gasket - 50ml
Bondloc B515 is a flexible, medium-strength gasketing anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts.B515 is medium strength Industrial gasketing product and provides an instant low pressure seal on machined and rigid metal parts.Typical applications include pumps, thermostats, compressors, transmission housings and axle covers.Colour: PurpleViscosity: PasteGap Fill: 0.3mmTensile Strength on Steel : Less than 6Nmm2 (ISO 4587)Fixture Time: Less than 35 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +150°C -
S.24087
BondLoc B518 - Flexible Gasket - 50ml
Bondloc B518 cures when air is excluded between close-fitting metal surfaces.B518 is a semi-flexible medium strength gasketing product recommended for use on rigid iron, stainless steel, aluminium, and steel flanged jointed surfaces.Fills gaps up to 0.25mm and is chemically resistant.Ideal for use on rigid metal faces and flanges i.e. pumps, motor housings and transmissions.Colour: RedViscosity: 200,000 - 800,000cpsGap Fill: 0.25mmTensile Strength on Steel: Greater Than5Nmm2 (ISO 4587)Fixture Speed: < 2 hours with activatorFull Cure Time: 12 hoursMin Max Temp: -55°C - +150°C -
S.24088
BondLoc B542 - Hydraulic Thread Sealant - 10ml
B542 is a fast curing medium strength anaerobic sealant designed for the locking and sealing of metal pipes and fittings and helps prevents loosening and leakage due to shock and vibration.The product cures when confined in the absence of air between close-fitting metal surfaces.B542 is resistant to hydraulic fluids, oils, fuel and coolants. Ideal for threads, hydraulic and pneumatic fittings.Colour: BrownViscosity: 400 - 800cpsBreakaway Strength on Steel: Less than 15Nm (ISO 10964)Prevail Torque: 9NmMax Thread Size: M36Fixture Time: 10 - 20 minsFull Cure Time: 24 hoursMin Max Temp: -55°C - +150°C -
S.24090
BondLoc B542 - Hydraulic Thread Sealant - 50ml
B542 is a fast curing medium strength anaerobic sealant designed for the locking and sealing of metal pipes and fittings and helps prevents loosening and leakage due to shock and vibration.The product cures when confined in the absence of air between close-fitting metal surfaces.B542 is resistant to hydraulic fluids, oils, fuel and coolants. Ideal for threads, hydraulic and pneumatic fittings.Colour: BrownViscosity: 400 - 800cpsBreakaway Strength on Steel: Less than 15Nm (ISO 10964)Prevail Torque: 9NmMax Thread Size: M36Fixture Time: 10 - 20 minsFull Cure Time: 24 hoursMin Max Temp: -55°C - +150°C -
S.26680
Exhaust Paste 500g
Asbestos free.Eases assembly of joints.Excellent lubrication properties.Ensures gas-tight seal (no carbon monoxide leaks)Vibration resistant.Also suitable for flues and boiler pipes.Withstands 1000°c.
-
S.26681
Hylomar Exhaust Paste (250g)
Asbestos free. Smooth texture for easy working. Efficient for leak-proof repairs. Withstands 1000°c. -
S.26670
Hylomar Non Setting Gasket and Jointing Compound - Universal Blue 100g
Resistant to a wide range of fluids including most fuels, oils and lubricants.Use on gaskets and metal surfaces.Temperature Range: -50 to 250°C -
S.26674
Instant Gasket 40ml
Forms a tough, durable and flexible rubber seal.Replaces traditional gaskets.Resists most common automotive fluids (not fuel).Bonds to metal, glass, rubber, plastics and more.Temperature range: -50 to 250°C. -
S.14963
LOCTITE® 515 Sealant - 50ml
Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time.LOCTITE® 515 is a medium strength (6 Nmm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.Ideal for machined metal componentsPerfect seal between componentsFor gaps up to 0.25 mm
-
S.14767
LOCTITE® 5922 MR 5922 Gasket Sealant 2 - 60ml
Flexible sealant paste that changes to a pliable, non-hardening film through solvent evaporation which seals flanges, fittings, connections, etc.LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets.Extends gasket lifePrevents leaksSlow dryingSpecifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assembliesFlexible settingIncreases the reliability of gasket seals -
S.24131
SILICONE RTV1 80ML
Fleixible Silicone Rubber that bonds, fills & seals permanently. Can be used on a wide variety of rubber, plastic & metal surfaces.