Bondloc B510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal parts.B510 has high temperature and chemical resistance and provides an instant low pressure seal.Typical applications include sealing rigid flange faces on transmissions and motor casings. Suitable for surface imperfections up to 0.25mm.Colour: PinkViscosity: 40,000 - 140,000cpsGap Fill: 0.25mmTensile Strength on Steel:
Bondloc B515 is a flexible, medium-strength gasketing anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts.B515 is medium strength Industrial gasketing product and provides an instant low pressure seal on machined and rigid metal parts.Typical applications include pumps, thermostats, compressors, transmission housings and axle covers.Colour: PurpleViscosity: PasteGap Fill: 0.3mmTensile Strength on Steel : Less than 6Nmm2 (ISO 4587)Fixture Time: Less than 35 minsFull Cure Time: 12 hoursMin Max Temp: -55°C - +150°C
Bondloc B518 cures when air is excluded between close-fitting metal surfaces.B518 is a semi-flexible medium strength gasketing product recommended for use on rigid iron, stainless steel, aluminium, and steel flanged jointed surfaces.Fills gaps up to 0.25mm and is chemically resistant.Ideal for use on rigid metal faces and flanges i.e. pumps, motor housings and transmissions.Colour: RedViscosity: 200,000 - 800,000cpsGap Fill: 0.25mmTensile Strength on Steel: Greater Than5Nmm2 (ISO 4587)Fixture Speed: < 2 hours with activatorFull Cure Time: 12 hoursMin Max Temp: -55°C - +150°C
Forms a tough, durable and flexible rubber seal.Replaces traditional gaskets.Resists most common automotive fluids (not fuel).Bonds to metal, glass, rubber, plastics and more.Temperature range: -50 to 250°C.
Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time.LOCTITE® 515 is a medium strength (6 Nmm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.Ideal for machined metal componentsPerfect seal between componentsFor gaps up to 0.25 mm
Flexible sealant paste that changes to a pliable, non-hardening film through solvent evaporation which seals flanges, fittings, connections, etc.LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets.Extends gasket lifePrevents leaksSlow dryingSpecifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assembliesFlexible settingIncreases the reliability of gasket seals